Product Categories
Contact Us
Zhuzhou Jiangwu Boda Hard-facing Materials Co.,Ltd
Tel:+86-731-22992236, +86-731-22461718
Fax:+86-731-22992236
Email:boda@bodamaterials.com
Office Add:Office Building 2nd Floor, South Airlines Industry and Trade Park, No.335, Zhuzhou Avenue, Tianyuan District, Zhuzhou City, Hunan P.R.C.412007
Factory Add:Jiulong Industry Park, Yanling County, Zhuzhou City, Hunan P.R.China
1, chromium stainless steel has a certain degree of corrosion resistance (oxidizing acid, organic acid, cavitation), heat resistance and wear resistance. Usually used for power station, chemical, petroleum and other equipment materials. Chromium stainless steel is poor in weldability, and attention should be paid to the welding process, heat treatment conditions, and the use of suitable electrodes.
2, chromium 13 stainless steel hardened after welding, prone to cracks. If using the same type of chromium stainless steel electrode (G202, G207) welding, preheating at 300°C or more and slow cooling at 700°C after welding must be performed. If the weldment cannot be post-weld heat treatment, a chromium-nickel stainless steel electrode should be used.
3, chromium 17 stainless steel, in order to improve the corrosion resistance and weldability and appropriate increase in the appropriate amount of stability elements Ti, Nb, Mo, etc., welding better than chrome 13 stainless steel. When using the same type of chromium stainless steel electrode (G302, G307), preheating above 200°C and tempering around 800°C after welding should be performed. If the weldment cannot be heat treated, a chromium-nickel stainless steel electrode should be used
4. Chrome-nickel stainless steel electrodes have good corrosion resistance and oxidation resistance and are widely used in chemical, fertilizer, petroleum, and medical machinery manufacturing.
5, chromium-nickel stainless steel welding, subject to repeated heating precipitation of carbides, reducing corrosion resistance and mechanical properties. 7. Chromium-nickel stainless steel coating has titanium calcium type and low hydrogen type. Titanium-calcium type can be used for AC and DC, but the depth of penetration is shallow during AC welding and it is easy to turn red. Therefore, DC power is used as much as possible. Diameters of 4.0 and below can be used for all-position weldments, and 5.0 and above for flat and flat fillet welds.
Previous: PTA production method
Related Industry Knowledge
- Basic introduction of welding rod
- Welding core introduction
- The role of welding
- Effect of Various Alloy Elements on...
- The main composition of the electrode
- The basic requirements of the elect...
- The main classification of electrodes
- PTA production method
- Extended use of PTA
- PTA related applications
- High Velocity Oxygen Fuel (HVOF) co...
- Plasma spray
- Flame Spraying
- The market for thermal spraying coa...
- What is thermal spray?
- Common use of thermal spray powder
- What is powder metallurgy? What's t...